dmesg - NVIDIA Cardhu Tegra 3
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
create_regulator: fixed_reg_en_3v3_sys: Failed to create debugfs directory
fsl-tegra-udc fsl-tegra-udc: can't get charge regulator,err:-19
tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
mousedev: PS/2 mouse device common for all mice
input: interrupt-keys as /devices/platform/interrupt-keys.0/input/input0
usbcore: registered new interface driver xpad
atmel_mxt_ts 1-005a: Config CRC read from the mXT: A24D9A
atmel_mxt_ts 1-005a: Matching CRC's, skipping CFG load.
atmel_mxt_ts 1-005a: Initialised power cfg: ACTV 255, IDLE 255
atmel_mxt_ts 1-005a: Family ID: 160 Variant ID: 0 Version: 16 Build: 170
usb 2-1: new full speed USB device number 2 using tegra-ehci
atmel_mxt_ts 1-005a: Matrix X Size: 0 Matrix Y Size: 0 Object Num: 18
input: atmel-maxtouch as /devices/platform/tegra-i2c.1/i2c-1/1-005a/input/input1
usb 2-1: New USB device found, idVendor=046d, idProduct=c223
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: G15 Keyboard Hub
hub 2-1:1.0: USB hub found
rtc_tps6591x rtc_tps6591x.0: RTC Time : 3/17/2012 2:28:3
hub 2-1:1.0: 4 ports detected
tps6591x 4-002d:
getting alarm time::
rtc_tps6591x rtc_tps6591x.0: RTC Time : 3/26/2000 4:32:16
using rtc device, rtc_tps6591x, for alarms
rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc0
rtc_tps6591x rtc_tps6591x.0: RTC Time : 3/17/2012 2:28:3
i2c /dev entries driver
i2c i2c-2: Added multiplexed i2c bus 6
i2c i2c-2: Added multiplexed i2c bus 7
i2c i2c-2: Added multiplexed i2c bus 8
i2c i2c-2: Added multiplexed i2c bus 9
pca954x 2-0070: registered 4 multiplexed busses for I2C switch pca9546
lirc_dev: IR Remote Control driver registered, major 249
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
usb 2-1.1: new low speed USB device number 3 using tegra-ehci
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
trpc_sema_init: registered misc dev 10:56
trpc_node_register: Adding 'local' to node list
nvavp nvavp: allocated IOVM at ff00000 for AVP os
tegra_camera tegra_camera: tegra_camera_probe
i2c-core: driver [bq20z75-battery] using legacy suspend method
i2c-core: driver [bq20z75-battery] using legacy resume method
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c226
usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
bq27x00-battery 4-0055: support ver. 1.2.0 enabled
usb 2-1.1: Product: G15 Gaming Keyboard
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: BlueSleep Mode Driver Ver 1.1
Wake7 for irq=390
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
usb 2-1.4: new full speed USB device number 4 using tegra-ehci
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
mmc0: Invalid maximum block size, assuming 512 bytes
mmc0: no vmmc regulator found
mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
sdhci-tegra sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
mmc1: Invalid maximum block size, assuming 512 bytes
mmc1: no vmmc regulator found
mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
Wake23 for irq=293
Wake23 for irq=293
Enabling wake23
gpio bank wake found: wake23 for irq=66
Enabling wake23
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c227
usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.4: Product: G15 GamePanel LCD
sdhci-tegra sdhci-tegra.0: Error: tegra3 io dpd not supported for sdhci-tegra.0
mmc2: Invalid maximum block size, assuming 512 bytes
mmc2: no vmmc regulator found
mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
tegra-se tegra-se: tegra_se_probe: complete
input: G15 Gaming Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
generic-usb 0003:046D:C226.0001: input: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-tegra-ehci.2-1.1/input0
input: G15 Gaming Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
generic-usb 0003:046D:C226.0002: input: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-tegra-ehci.2-1.1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
kobject '(null)' (ef1f5c18): tried to add an uninitialized object, something is seriously wrong.
[] (unwind_backtrace+0x0/0x104) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (kobject_add+0x58/0x60)
[] (kobject_add+0x58/0x60) from [] (device_add+0x9c/0x640)
[] (device_add+0x9c/0x640) from [] (iio_device_register+0x6c/0xa5c)
mmc0: new high speed DDR MMC card at address 0001
input: G15 GamePanel LCD as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
generic-usb 0003:046D:C227.0003: input: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-tegra-ehci.2-1.4/input0
[] (iio_device_register+0x6c/0xa5c) from [] (ak8975_probe+0x18c/0x264)
[] (ak8975_probe+0x18c/0x264) from [] (i2c_device_probe+0xc4/0xf8)
[] (i2c_device_probe+0xc4/0xf8) from [] (driver_probe_device+0xac/0x1d4)
[] (driver_probe_device+0xac/0x1d4) from [] (__driver_attach+0x9c/0xa0)
[] (__driver_attach+0x9c/0xa0) from [] (bus_for_each_dev+0x70/0x9c)
[] (bus_for_each_dev+0x70/0x9c) from [] (driver_attach+0x2c/0x30)
[] (driver_attach+0x2c/0x30) from [] (bus_add_driver+0x1a0/0x258)
[] (bus_add_driver+0x1a0/0x258) from [] (driver_register+0x80/0x160)
[] (driver_register+0x80/0x160) from [] (i2c_register_driver+0x40/0xc4)
[] (i2c_register_driver+0x40/0xc4) from [] (ak8975_init+0x1c/0x20)
[] (ak8975_init+0x1c/0x20) from [] (do_one_initcall+0x44/0x188)
[] (do_one_initcall+0x44/0x188) from [] (kernel_init+0xc4/0x158)
[] (kernel_init+0xc4/0x158) from [] (kernel_thread_exit+0x0/0x8)
------------[ cut here ]------------
WARNING: at /home/administrator/build_area/git-master_linux-k310/kernel/lib/kobject.c:595 kobject_put+0x5c/0x60()
kobject: '(null)' (ef1f5c18): is not initialized, yet kobject_put() is being called.
Modules linked in:
[] (unwind_backtrace+0x0/0x104) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x64/0x74)
[] (warn_slowpath_common+0x64/0x74) from [] (warn_slowpath_fmt+0x40/0x48)
[] (warn_slowpath_fmt+0x40/0x48) from [] (kobject_put+0x5c/0x60)
[] (kobject_put+0x5c/0x60) from [] (put_device+0x24/0x28)
[] (put_device+0x24/0x28) from [] (device_add+0x21c/0x640)
[] (device_add+0x21c/0x640) from [] (iio_device_register+0x6c/0xa5c)
[] (iio_device_register+0x6c/0xa5c) from [] (ak8975_probe+0x18c/0x264)
[] (ak8975_probe+0x18c/0x264) from [] (i2c_device_probe+0xc4/0xf8)
[] (i2c_device_probe+0xc4/0xf8) from [] (driver_probe_device+0xac/0x1d4)
[] (driver_probe_device+0xac/0x1d4) from [] (__driver_attach+0x9c/0xa0)
[] (__driver_attach+0x9c/0xa0) from [] (bus_for_each_dev+0x70/0x9c)
[] (bus_for_each_dev+0x70/0x9c) from [] (driver_attach+0x2c/0x30)
[] (driver_attach+0x2c/0x30) from [] (bus_add_driver+0x1a0/0x258)
[] (bus_add_driver+0x1a0/0x258) from [] (driver_register+0x80/0x160)
[] (driver_register+0x80/0x160) from [] (i2c_register_driver+0x40/0xc4)
[] (i2c_register_driver+0x40/0xc4) from [] (ak8975_init+0x1c/0x20)
[] (ak8975_init+0x1c/0x20) from [] (do_one_initcall+0x44/0x188)
[] (do_one_initcall+0x44/0x188) from [] (kernel_init+0xc4/0x158)
[] (kernel_init+0xc4/0x158) from [] (kernel_thread_exit+0x0/0x8)
---[ end trace 581e4a0a614ac1c2 ]---
------------[ cut here ]------------
WARNING: at /home/administrator/build_area/git-master_linux-k310/kernel/lib/kobject.c:595 kobject_put+0x5c/0x60()
kobject: '(null)' (ef1f5c18): is not initialized, yet kobject_put() is being called.
Modules linked in:
[] (unwind_backtrace+0x0/0x104) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x64/0x74)
[] (warn_slowpath_common+0x64/0x74) from [] (warn_slowpath_fmt+0x40/0x48)
[] (warn_slowpath_fmt+0x40/0x48) from [] (kobject_put+0x5c/0x60)
[] (kobject_put+0x5c/0x60) from [] (put_device+0x24/0x28)
[] (put_device+0x24/0x28) from [] (iio_free_device+0x24/0x28)
[] (iio_free_device+0x24/0x28) from [] (ak8975_probe+0x1cc/0x264)
[] (ak8975_probe+0x1cc/0x264) from [] (i2c_device_probe+0xc4/0xf8)
[] (i2c_device_probe+0xc4/0xf8) from [] (driver_probe_device+0xac/0x1d4)
[] (driver_probe_device+0xac/0x1d4) from [] (__driver_attach+0x9c/0xa0)
[] (__driver_attach+0x9c/0xa0) from [] (bus_for_each_dev+0x70/0x9c)
[] (bus_for_each_dev+0x70/0x9c) from [] (driver_attach+0x2c/0x30)
[] (driver_attach+0x2c/0x30) from [] (bus_add_driver+0x1a0/0x258)
[] (bus_add_driver+0x1a0/0x258) from [] (driver_register+0x80/0x160)
[] (driver_register+0x80/0x160) from [] (i2c_register_driver+0x40/0xc4)
[] (i2c_register_driver+0x40/0xc4) from [] (ak8975_init+0x1c/0x20)
[] (ak8975_init+0x1c/0x20) from [] (do_one_initcall+0x44/0x188)
[] (do_one_initcall+0x44/0x188) from [] (kernel_init+0xc4/0x158)
[] (kernel_init+0xc4/0x158) from [] (kernel_thread_exit+0x0/0x8)
---[ end trace 581e4a0a614ac1c3 ]---
ak8975: probe of 2-000c failed with error -22
tegra-snd-wm8903 tegra-snd-wm8903.0: No speaker regulator found
tegra-snd-wm8903 tegra-snd-wm8903.0: No digital mic regulator found
wm8903 4-001a: WM8903 revision C
Wake11 for irq=403
Wake12 for irq=402
asoc: wm8903-hifi tegra30-i2s.1 mapping ok
asoc: dit-hifi tegra30-spdif mapping ok
asoc: dit-hifi tegra30-i2s.3 mapping ok
input: tegra-wm8903 Mic Jack as /devices/platform/tegra-snd-wm8903.0/sound/card0/input5
input: tegra-wm8903 Headphone Jack as /devices/platform/tegra-snd-wm8903.0/sound/card0/input6
ALSA device list:
#0: tegra-wm8903
oprofile: using arm/armv7-ca9
GACT probability NOT on
mmcblk0: mmc0:0001 SEM16G 14.8 GiB
mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB
mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB
Primary GPT is invalid, using alternate GPT.
mmcblk0: p1 p2 p3 p4 p5
Mirror/redirect action on
mmcblk0boot1: unknown partition table
u32 classifier
mmcblk0boot0: unknown partition table
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15629 buckets, 62516 max)
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 37
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
Disabling clocks left on by bootloader:
audio_2x
audio4_2x
audio3_2x
audio2_2x
audio1_2x
audio0_2x
audio
audio4
audio3
audio2
audio1
audio0
uarta
fuse_burn
cclk_lp
pll_x_out0
pll_d2_out0
pll_d_out0
pll_p_out2
pll_c_out1
pll_m_out1
CPU rate: 1000 MHz
tegra3_dvfs: minimum cap.cbus rate 247000000 requires 1000 mV
tegra dvfs: tegra sysfs cap interface is initialized
tegra_actmon.emc: Completed initialization (0)
tegra_actmon.avp: Completed initialization (0)
regulator_init_complete: fixed_reg_en_vdd_bl2: disabling
input: gpio-keys as /devices/platform/gpio-keys.0/input/input7
rtc_tps6591x rtc_tps6591x.0: RTC Time : 3/17/2012 2:28:5
rtc_tps6591x rtc_tps6591x.0: setting system clock to 2012-03-17 02:28:05 UTC (1331951285)
Waiting for root device /dev/mmcblk1p1...
mmc2: new high speed SDHC card at address 0007
mmcblk1: mmc2:0007 SD04G 3.81 GiB
mmcblk1: p1
tegra-otg tegra-otg: PERIPHERAL --> SUSPEND
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk1p1): using internal journal
EXT3-fs (mmcblk1p1): recovery complete
EXT3-fs (mmcblk1p1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:49.
Freeing init memory: 384K
i2c i2c-2: mpu_probe: 0
mldl_cfg:Reset MPU6050 B1
mpu3050: exports duplicate symbol inv_mpu_register_slave (owned by mpu6050b1)
mldl_cfg:Product id read as 0 indicates device is either incompatible or an MPU3050
/home/administrator/build_area/git-master_linux-k310/kernel/drivers/misc/inv_mpu/mpu6050/mldl_cfg.c|inv_mpu_open|1415 returning 19
i2c i2c-2: Unable to open mpu6050B1 19
ov2710: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
i2c i2c-2: mpu_probe failed -19
i2c-core: driver [mpu6050B1] using legacy suspend method
i2c-core: driver [mpu6050B1] using legacy resume method
mpu_init: Probe name mpu6050B1
ov2710 sensor driver loading
ov2710: probing sensor.
ov5650 sensor driver loading
left_ov5650_probe: probing sensor.
i2c i2c-2: kxtf9_mod_probe: kxtf9
i2c i2c-2: inv_mpu_register_slave: Null mpu_private_data
right_ov5650_probe: probing sensor.
i2c i2c-2: Slave registration failed: kxtf9, -22
i2c i2c-2: kxtf9_mod_probe failed -22
kxtf9_mod: probe of 2-000f failed with error -22
i2c i2c-2: ak89xx_mod_probe: ak8975
i2c i2c-2: inv_mpu_register_slave: Null mpu_private_data
i2c i2c-2: Slave registration failed: ak8975, -22
i2c i2c-2: ak89xx_mod_probe failed -22
kxtf9_mod_init: Probe name kxtf9_mod
ak89xx_mod: probe of 2-000c failed with error -22
ak89xx_mod_init: Probe name ak89xx_mod
i2c i2c-2: ak8975_mod_probe: ak8975
i2c i2c-2: inv_mpu_register_slave: Null mpu_private_data
i2c i2c-2: Slave registration failed: ak8975, -22
i2c i2c-2: ak8975_mod_probe failed -22
ak8975_mod: probe of 2-000c failed with error -22
ak8975_mod_init: Probe name ak8975_mod
spdif-dit spdif-dit.1: dapm: unknown pin LineOut
spdif-dit spdif-dit.1: dapm: unknown pin LineIn
r8169 0000:03:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
spdif-dit spdif-dit.1: dapm: unknown pin LineOut
spdif-dit spdif-dit.1: dapm: unknown pin LineIn
Tegra auto-hotplug enabled
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU1: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU1: shutdown
tegra CPU: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
tegra CPU: force EDP limit 1100000 kHz
CPU3: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #3
tegra_pwm tegra_pwm.0: pwm_disable called on disabled PWM
CPU2: shutdown
CPU1: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
tegra CPU: force EDP limit 1100000 kHz
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU3: shutdown
CPU1: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
tegra CPU: force EDP limit 1100000 kHz
CPU3: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #3
CPU2: shutdown
tegra CPU: force EDP limit 1100000 kHz
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU1: shutdown
CPU2: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
tegra CPU: force EDP limit 1100000 kHz
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU1: shutdown
CPU2: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
tegra CPU: force EDP limit 1100000 kHz
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
tegra CPU: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
tegra CPU: force EDP limit 1100000 kHz
CPU3: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #3
CPU1: shutdown
CPU2: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
tegra CPU: force EDP limit 1100000 kHz
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU1: shutdown
CPU2: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
tegra CPU: force EDP limit 1100000 kHz
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU2: shutdown
CPU1: shutdown
CPU3: shutdown
tegra CPU: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU3: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #3
CPU1: shutdown
CPU2: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU1: shutdown
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU3: shutdown
CPU1: shutdown
CPU2: shutdown
tegra CPU: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #2
CPU3: Booted secondary processor
Calibrating delay loop (skipped) already calibrated this CPU
Switched to NOHz mode on CPU #3